Tel:+86188-6259-1779
Website:www.szdeles.com
Address: NO.7 Huaxi road, Wangzhuang Industrial Park, Shanxin Village , Shanghu Town, Changshu City
Cold rolled steel profiles are generally used as the material of shelves, but few manufacturers use national standards (mainly due to price). The simple way is to conduct an experiment according to the load-bearing agreed by both parties.. There seems to be no strict and complete shelf industry standard in China, and few shelves can meet the European FEM shelf standardSupermarket Shelf manufacturer
2. For the structure of the shelf, the shelf column depends on whether the bending of the section is more and uniform. The more the shelf is, the better the symmetrical structure is. The cross beam of the shelf depends on the hook structure of the cross beam and the form of the cross beam hanging to the column: it is better to have more hooks of the cross beam, and the more the stress is about better; When the hook of the cross beam is hung on the column, it depends on whether the contact between the hook and the column is close. The inner side of the hook should be close to the side of the column without gap. Only in this way can the structure be stable, well stressed and durable
3. For the surface treatment of the shelf, the spraying treatment of the shelf surface shall be uniform and have strong adhesion. Whether the spraying of the shelf surface is uniform depends on whether there is any omission at the inner edge of the shelf column hole. During inspection, it can be tapped with a hard object. If it is easy to fall off, it indicates that the shelf is easy to rust
Tel:+86188-6259-1779
Website:www.szdeles.com
Address: NO.7 Huaxi road, Wangzhuang Industrial Park, Shanxin Village , Shanghu Town, Changshu City
Daniel:
+8618862591779
Record No: Su ICP Bei No. 2021047194 Copyright © Suzhou deleshi Commercial Equipment Co., Ltd 2021 All rights reserved Technical support: enterprise Lihang